No products in the cart.
Plain Base Plate
Provides stability to the scaffold structure when place at the base and stops the tubes from slipping across the floor
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 150 mm X 150 mm | 1.8 |  | | Plain base plate | |||
| default variation | 1.8 | | | Plain base plate |
Related Products
Wall Tie Bracket
Wall tie brackets one half coupler and two half couplers suitable to hold 48.30 OD tube are used to secure the scaffold to a structre.
| Size | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|
| 0.3 M | | | Wall tie bracket 1 coupler | |||
| 0.3 M | | | Wall tie bracket 2 coupler |
Kwikstage Standards
Standards are vertical structural member of the scaffold system which are made from 48.3 OD X 4mm Tubes. Standards have ÒVÓ pressings in clusters at 495 mm centres, which provide location points for Transoms, Ledgers, Braces,, Hopups etc and a spigot fixed at the top
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.3 M | 3 | | | Standard Topper | |||
| 0.5 M | 3.6 | | | 0.5 m standard | |||
| 1.0 M | 6.5 | | | 1.0 m standard | |||
| 1.5 M | 9.15 | | | 1.5 m standard | |||
| 2.0 M | 12.15 | | | 2.0 m standard | |||
| 2.5 M | 14.7 | | | 2.5 m standard | |||
| 3.0 M | 17.5 | | | 3.0 m standard |
Mesh pallet – cage pallet
A steel structure built to hold goods in a stable fashion while being lifted by a forklift to stock, stack-up and transport
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.3 M | 66 | | | Mesh pallet / cages | |||
| default variation | 66 | | | Mesh pallet / cages |
Kwikstage Hopup bracket – Straight arm
Board Stage Brackets / hopups fit into the ÒVÓ pressing of the standard which is nearest to the wall. The 2 & 3 BSB have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 2 BOARD WIDE | 6.25 | | | 2 board hopup straight arm | |||
| 3 BOARD WIDE | 11.25 | | | 3 board hopup straight arm |
Kwikstage Ladder Access Transoms
Transom component used for insertion into scaffold bay. Allows installation of a ladder opening within the scaffold deck.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.7 M | 5.3 | | | 0.7 m Ladder Access transom | |||
| 1.2 M | 7.5 | | | 1.2 m ladder access transom | |||
| 1.8 M | 13.2 | | | 1.8 m ladder access transom | |||
| 2.4 M | 16.5 | | | 2.4 m ladder access transom |