No products in the cart.
Aluminium stairs
These Aluminium stairs are designed specifically for use with the steel quickstage modular scaffolding system.
They are pre-fabricated and designed to fit in a 1.2m x 2.5m bay with a 1.5m rise (lift).
The stairs are 564mm wide with a rise of 230mm. Two stairs will fit perfectly side by side on a 1.2m bay.
To conform with NSW work cover we also offer the handrail system & top rail system.
| Description | Weight | Quantity | ||
|---|---|---|---|---|
| 1.5 m Aluminium stair | 35 kgs | |||
| Aluminium side rail | 5 kgs | |||
| Aluminium top rail | 4.5 kgs | |||
| 2.0 m Aluminium stair | 34 kgs | |||
| 1.0 m Aluminium stair | 20 kgs |
Related Products
Kwikstage Hopup bracket – Straight arm
Board Stage Brackets / hopups fit into the ÒVÓ pressing of the standard which is nearest to the wall. The 2 & 3 BSB have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 2 BOARD WIDE | 6.25 |  | | 2 board hopup straight arm | |||
| 3 BOARD WIDE | 11.25 | | | 3 board hopup straight arm |
Double Coupler
A strong drop forged coupler that connects two Scaffold tubes of 48.3 OD providing strength under load bearing situations joining tubes at 90 degree angles.
| Size | Weight | Item Description | Quantity | ||
|---|---|---|---|---|---|
| 48.3 mm | 1.1 | No Description | |||
| default variation | 1.1 | No Description |
Plain Base Plate
Provides stability to the scaffold structure when place at the base and stops the tubes from slipping across the floor
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 150 mm X 150 mm | 1.8 | | | Plain base plate | |||
| default variation | 1.8 | | | Plain base plate |
Kwikstage Standards
Standards are vertical structural member of the scaffold system which are made from 48.3 OD X 4mm Tubes. Standards have ÒVÓ pressings in clusters at 495 mm centres, which provide location points for Transoms, Ledgers, Braces,, Hopups etc and a spigot fixed at the top
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.3 M | 3 | | | Standard Topper | |||
| 0.5 M | 3.6 | | | 0.5 m standard | |||
| 1.0 M | 6.5 | | | 1.0 m standard | |||
| 1.5 M | 9.15 | | | 1.5 m standard | |||
| 2.0 M | 12.15 | | | 2.0 m standard | |||
| 2.5 M | 14.7 | | | 2.5 m standard | |||
| 3.0 M | 17.5 | | | 3.0 m standard |
Plain Base Plate
Provides stability to the scaffold structure when place at the base and stops the tubes from slipping across the floor
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 150 mm X 150 mm | 1.8 | | | Plain base plate | |||
| default variation | 1.8 | | | Plain base plate |