Double C Clips
Used to Join Kwikstage scaffolding Standards Back to Back for more stability and steenght to the scaffold structure
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 1.5 | Double C Coupler | |||||
default variation | 1.5 | Double C Coupler |
Related Products
Step down bracket
The first step onto a stair access or ladder access is always difficult due to site constraints, ground levels and base outs. The use of the adjustable step down bracket gives the comfort of adjustment to balance the variables so the step becomesbalanced when getting on or getting off a stair access at ground level.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 4.3 | one step down bracket | |||||
0.3 M | 6.5 | Two step down bracket |
Toe board bracket
Toe baord brackets also known as toe board clips are Clamped to the standard with a captive wedge to hold the batten toe board vertically in place.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 0.85 | Toe board bracket | |||||
default variation | 0.85 | Toe board bracket |
Mesh pallet – cage pallet
A steel structure built to hold goods in a stable fashion while being lifted by a forklift to stock, stack-up and transport
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 66 | Mesh pallet / cages | |||||
default variation | 66 | Mesh pallet / cages |
Kwikstage Ledger Transoms
Heavy duty back to back angle transoms for location of scaffold boards. These are used to where greater loads are required for pedestrain access.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
1.2 M | 19 | 1.2 m ledger transom | |||||
1.8 M | 32 | 1.8 m ledger transom | |||||
2.4 M | 42 | 2.4 m ledger transom |
LVL Scaffold planks
LVL Scaffold planks are Structural laminated veneer lumber and designed to be used as a non-modular scaffold plank as a part of a working platform in accordance with the requirements of AS/NZS 1576.1 and AS/NZS 1577.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
3.6 | 19.8 | Steel ladder beam | |||||
3 | 16.5 | Steel ladder beam | |||||
2.4 | 13.2 | Steel ladder beam | |||||
1.8 | 9.9 | Steel ladder beam | |||||
1.5 | 8.25 | Steel ladder beam | |||||
1.2 | 6.6 | Steel ladder beam |