Kwikstage brace end
Size | Weight | Item Description | Quantity | ||
---|---|---|---|---|---|
0.3 M | 0.72 | No Description | |||
default variation | 0.72 | No Description |
Related Products
Kwikstage Hopup Bracket
Board Stage Brackets / hopups fit into the (V) pressing of the standard which is nearest to the wall. The 2 & 3 BSB have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
1 BOARD WIDE | 2.4 | 1 Board stage bracket | |||||
2 BOARD WIDE | 6.5 | 2 Board stage bracket | |||||
3 BOARD WIDE | 11.4 | 3 Board stage bracket |
Kwikstage Transoms
Transoms are made by welding two 5.00 mm angles back to back. Transoms fit into the lower ÒVÓ pressings on the standards to carry steel boards which make a safe working platform.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.5 M | 5.8 | 0.5 m transom | |||||
0.7 M | 6.1 | 0.7 m transom | |||||
1.0 M | 7.2 | 1.0 m transom | |||||
1.2 M | 9.8 | 1.2 m transom | |||||
1.8 M | 15 | 1.8 m transom | |||||
2.4 M | 21 | 2.4 m transom |
Steel Ladder Beam
Ladder Beams are made of standard 48.3 X 4 mm Tubes. Ladder beams give you versatality to span over difficult access locations.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
6.3 M | 80 | Steel ladder beam | |||||
6.0 M | 72 | Steel ladder beam | |||||
5.4 M | 64 | Steel ladder beam | |||||
4.8 M | 55 | Steel ladder beam | |||||
3.0 M | 35 | Steel ladder beam |
Toe board bracket
Toe baord brackets also known as toe board clips are Clamped to the standard with a captive wedge to hold the batten toe board vertically in place.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 0.85 | Toe board bracket | |||||
default variation | 0.85 | Toe board bracket |
Kwikstage Ledger Transoms
Heavy duty back to back angle transoms for location of scaffold boards. These are used to where greater loads are required for pedestrain access.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
1.2 M | 19 | 1.2 m ledger transom | |||||
1.8 M | 32 | 1.8 m ledger transom | |||||
2.4 M | 42 | 2.4 m ledger transom |