No products in the cart.
Kwikstage Diagonal Braces
Diagonal Braces provides strength and stability to the scaffold. They fit diagonally across the scaffold bay. They can be used for handrail to strecther stairs.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 1.7 M | 8.4 |  | | 1.7 m brace | |||
| 2.1 M | 8.6 | | | 2.1 m brace | |||
| 2.7 M | 11.5 | | | 2.7 m brace | |||
| 3.2 M | 13.4 | | | 3.2 m brace | |||
| 3.6 M | 14.7 | | | 3.6 m brace |
Related Products
Double Coupler
A strong drop forged coupler that connects two Scaffold tubes of 48.3 OD providing strength under load bearing situations joining tubes at 90 degree angles.
| Size | Weight | Item Description | Quantity | ||
|---|---|---|---|---|---|
| 48.3 mm | 1.1 | No Description | |||
| default variation | 1.1 | No Description |
Double C Clips
Used to Join Kwikstage scaffolding Standards Back to Back for more stability and steenght to the scaffold structure
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.3 M | 1.5 | | | Double C Coupler | |||
| default variation | 1.5 | | | Double C Coupler |
Kwikstage Tie Bars
Tie bars have pins at each ends which fit in holes of 2 and 3 board stage brackets (hopups) to prevent the brackets from spreading and the planks from becoming dislodged
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 0.7 M | 2.5 | | | 0.7 m tie bar | |||
| 1.2 M | 3.6 | | | 1.2 m tie bar | |||
| 1.8 M | 5.2 | | | 1.8 m tie bar | |||
| 2.4 M | 7 | | | 2.4 m tie bar |
Bridging Ledger
The bridging ledger is provided to achieve a clear span of 4.8m by eliminating the centre set of standards, whilst maintaining the continuity of the scaffold deck.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 4.8 M | 26.5 | | 4.8 m Bridging Ledger | ||||
| default variation | 26.5 | | 4.8 m Bridging Ledger |
Kwikstage Galvanized Steel Infills
The steel in-fill spans between the transoms giving a non slip surface with a is hot dip galvanized finish.
| Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
|---|---|---|---|---|---|---|---|
| 1.2 M | 4.05 | | 1.2 m galvanized steel infill | ||||
| 1.8 M | 6 | | 1.8 m galvanized steel infill | ||||
| 2.4 M | 7.5 | | 2.4 m galvanized steel infill |