V Coupler
Size | Weight | Item Description | Quantity | ||
---|---|---|---|---|---|
48.3mm | 1.1 | No Description | |||
default variation | 1.1 | No Description |
Related Products
Sole boards
Soleboards are hardwood timber planks used under Scaffold base jacks to provide greater load bearing capacity.ÊFor uneven ground levels you can use the adjustbale base jacks
Size | Weight | Item Description | Quantity | ||
---|---|---|---|---|---|
0.5 M X 230 MM | 4.3 | 0.5 m sole board | |||
default variation | 4.3 | 0.5 m sole board |
Kwikstage Hopup Bracket
Board Stage Brackets / hopups fit into the (V) pressing of the standard which is nearest to the wall. The 2 & 3 BSB have holes into which tie bar pins are attached. They are used to provide cantilevered platform on the inside of the scaffold nearest the wall.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
1 BOARD WIDE | 2.4 | 1 Board stage bracket | |||||
2 BOARD WIDE | 6.5 | 2 Board stage bracket | |||||
3 BOARD WIDE | 11.4 | 3 Board stage bracket |
Kwikstage Ledger Transoms
Heavy duty back to back angle transoms for location of scaffold boards. These are used to where greater loads are required for pedestrain access.
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
1.2 M | 19 | 1.2 m ledger transom | |||||
1.8 M | 32 | 1.8 m ledger transom | |||||
2.4 M | 42 | 2.4 m ledger transom |
Sole boards
Soleboards are hardwood timber planks used under Scaffold base jacks to provide greater load bearing capacity.ÊFor uneven ground levels you can use the adjustbale base jacks
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.5 M X 230 MM | 4.3 | 0.5 m sole board | |||||
default variation | 4.3 | 0.5 m sole board |
Kwikstage Standards
Standards are vertical structural member of the scaffold system which are made from 48.3 OD X 4mm Tubes. Standards have ÒVÓ pressings in clusters at 495 mm centres, which provide location points for Transoms, Ledgers, Braces,, Hopups etc and a spigot fixed at the top
Size | Weight | Painted | Galvanised | Item Description | Quantity | ||
---|---|---|---|---|---|---|---|
0.3 M | 3 | Standard Topper | |||||
0.5 M | 3.6 | 0.5 m standard | |||||
1.0 M | 6.5 | 1.0 m standard | |||||
1.5 M | 9.15 | 1.5 m standard | |||||
2.0 M | 12.15 | 2.0 m standard | |||||
2.5 M | 14.7 | 2.5 m standard | |||||
3.0 M | 17.5 | 3.0 m standard |